Hello All,
Thanks for your great language and great manual. But I noticed that the manual is a bit outdated which is good for me. It forces me to really work hard. However, I got error message each time I try this:
sudo gsc -exe square *** WARNING -- Unknown or improperly placed option: "exe"
Regards, \Emeka
Afficher les réponses par date
Emeka,
What version of Gambit are you running (can be found by gsc -v)?
That flag works fine for me here running v4.8.5
James
On Tue, Jul 26, 2016 at 10:06 AM, Emeka emekamicro@gmail.com wrote:
Hello All,
Thanks for your great language and great manual. But I noticed that the manual is a bit outdated which is good for me. It forces me to really work hard. However, I got error message each time I try this:
sudo gsc -exe square *** WARNING -- Unknown or improperly placed option: "exe"
Regards, \Emeka
-- P.S Please join our groups*: *nigeriaarduinogroup@googlegroups.com
- or *jifunze-kufikiria@googlegroups.com These are platforms for
learning and sharing of knowledge. www.satajanus.com | *Satajanus Nig. Ltd*
Gambit-list mailing list Gambit-list@iro.umontreal.ca https://webmail.iro.umontreal.ca/mailman/listinfo/gambit-list
James,
My box is Ubuntu 15.0, and my Gambit version: gsc -v v4.2.8
Sorry for the late response.
Emeka
On Tue, Jul 26, 2016 at 2:02 AM, James Baker james@waveformdynamics.com.au wrote:
Emeka,
What version of Gambit are you running (can be found by gsc -v)?
That flag works fine for me here running v4.8.5
James
On Tue, Jul 26, 2016 at 10:06 AM, Emeka emekamicro@gmail.com wrote:
Hello All,
Thanks for your great language and great manual. But I noticed that the manual is a bit outdated which is good for me. It forces me to really work hard. However, I got error message each time I try this:
sudo gsc -exe square *** WARNING -- Unknown or improperly placed option: "exe"
Regards, \Emeka
-- P.S Please join our groups*: *nigeriaarduinogroup@googlegroups.com
- or *jifunze-kufikiria@googlegroups.com These are platforms for
learning and sharing of knowledge. www.satajanus.com | *Satajanus Nig. Ltd*
Gambit-list mailing list Gambit-list@iro.umontreal.ca https://webmail.iro.umontreal.ca/mailman/listinfo/gambit-list
Hi Emeka,
Well I think that will be the issue, I'm fairly sure that flag was introduced in a newer version.
If you don't want to or cant install a newer version of Gambit what might help would be installing the documentation for the same version you are using which assuming that your install is from the ubuntu packages would just be "apt-get install gambc-doc". Then you can find the html version of the manual at /usr/share/doc/gambc-doc/gambit-c.html which might help clear up some of the confusion.
James
On Fri, Jul 29, 2016 at 5:13 AM, Emeka emekamicro@gmail.com wrote:
James,
My box is Ubuntu 15.0, and my Gambit version: gsc -v v4.2.8
Sorry for the late response.
Emeka
On Tue, Jul 26, 2016 at 2:02 AM, James Baker < james@waveformdynamics.com.au> wrote:
Emeka,
What version of Gambit are you running (can be found by gsc -v)?
That flag works fine for me here running v4.8.5
James
On Tue, Jul 26, 2016 at 10:06 AM, Emeka emekamicro@gmail.com wrote:
Hello All,
Thanks for your great language and great manual. But I noticed that the manual is a bit outdated which is good for me. It forces me to really work hard. However, I got error message each time I try this:
sudo gsc -exe square *** WARNING -- Unknown or improperly placed option: "exe"
Regards, \Emeka
-- P.S Please join our groups*: *nigeriaarduinogroup@googlegroups.com
- or *jifunze-kufikiria@googlegroups.com These are platforms for
learning and sharing of knowledge. www.satajanus.com | *Satajanus Nig. Ltd*
Gambit-list mailing list Gambit-list@iro.umontreal.ca https://webmail.iro.umontreal.ca/mailman/listinfo/gambit-list
-- P.S Please join our groups*: *nigeriaarduinogroup@googlegroups.com
- or *jifunze-kufikiria@googlegroups.com These are platforms for
learning and sharing of knowledge. www.satajanus.com | *Satajanus Nig. Ltd*
Merci
On Thu, Jul 28, 2016 at 10:57 PM, James Baker <james@waveformdynamics.com.au
wrote:
Hi Emeka,
Well I think that will be the issue, I'm fairly sure that flag was introduced in a newer version.
If you don't want to or cant install a newer version of Gambit what might help would be installing the documentation for the same version you are using which assuming that your install is from the ubuntu packages would just be "apt-get install gambc-doc". Then you can find the html version of the manual at /usr/share/doc/gambc-doc/gambit-c.html which might help clear up some of the confusion.
James
On Fri, Jul 29, 2016 at 5:13 AM, Emeka emekamicro@gmail.com wrote:
James,
My box is Ubuntu 15.0, and my Gambit version: gsc -v v4.2.8
Sorry for the late response.
Emeka
On Tue, Jul 26, 2016 at 2:02 AM, James Baker < james@waveformdynamics.com.au> wrote:
Emeka,
What version of Gambit are you running (can be found by gsc -v)?
That flag works fine for me here running v4.8.5
James
On Tue, Jul 26, 2016 at 10:06 AM, Emeka emekamicro@gmail.com wrote:
Hello All,
Thanks for your great language and great manual. But I noticed that the manual is a bit outdated which is good for me. It forces me to really work hard. However, I got error message each time I try this:
sudo gsc -exe square *** WARNING -- Unknown or improperly placed option: "exe"
Regards, \Emeka
-- P.S Please join our groups*: *nigeriaarduinogroup@googlegroups.com
- or *jifunze-kufikiria@googlegroups.com These are platforms for
learning and sharing of knowledge. www.satajanus.com | *Satajanus Nig. Ltd*
Gambit-list mailing list Gambit-list@iro.umontreal.ca https://webmail.iro.umontreal.ca/mailman/listinfo/gambit-list
-- P.S Please join our groups*: *nigeriaarduinogroup@googlegroups.com
- or *jifunze-kufikiria@googlegroups.com These are platforms for
learning and sharing of knowledge. www.satajanus.com | *Satajanus Nig. Ltd*
-
Emeka -
James Baker