Gambit-list Novembre 2016

gambit-list@iro.umontreal.ca

10 participants
15 discussions

Gambit versus Python+GMP: Timing for Chudnovskys' algorithm for pi
by Bradley Lucier 07 Avr '22

07 Avr '22

Bakul Shah wrote a particularly elegant Scheme program for Chudnovskys' algorithm for pi based on the Common Lisp program here: https://bitbucket.org/tarballs_are_good/numericl/src/5fe8fe7089f48ab1c8a388… Nick Craig-Wood wrote a Python program using the GMP multiprecision library that appears to use exactly the same algorithm here: http://www.craig-wood.com/nick/articles/pi-chudnovsky/ I modified both programs a bit and include them here. They time the calculation of $10^n$ digits of pi for $n=1,2,3,4,5,6,7$. The results are heine:~/programs/gambiteer/gambit> !py python pi_chudnovsky_bs_gmpy.py 31415926535897932384626433832795028841971693993751058209749445923078164062862089986280348253421170679 ('chudnovsky_gmpy_mpz_bs: digits', 10, 'time', 1.0967254638671875e-05) ('chudnovsky_gmpy_mpz_bs: digits', 100, 'time', 3.0040740966796875e-05) Last 5 digits 70679 OK ('chudnovsky_gmpy_mpz_bs: digits', 1000, 'time', 0.00025582313537597656) Last 5 digits 01989 OK ('chudnovsky_gmpy_mpz_bs: digits', 10000, 'time', 0.00386810302734375) Last 5 digits 75678 OK ('chudnovsky_gmpy_mpz_bs: digits', 100000, 'time', 0.0834801197052002) Last 5 digits 24646 OK ('chudnovsky_gmpy_mpz_bs: digits', 1000000, 'time', 1.655979871749878) Last 5 digits 58151 OK ('chudnovsky_gmpy_mpz_bs: digits', 10000000, 'time', 30.67442488670349) Last 5 digits 55897 OK heine:~/programs/gambiteer/gambit> gsi chud1.scm Chudnovsky's algorithm using binary splitting in Gambit Scheme: digits 10, CPU time: 0.. Last 5 digits 26535. Chudnovsky's algorithm using binary splitting in Gambit Scheme: digits 100, CPU time: 0.. Last 5 digits 70679. Chudnovsky's algorithm using binary splitting in Gambit Scheme: digits 1000, CPU time: .004. Last 5 digits 1989. Chudnovsky's algorithm using binary splitting in Gambit Scheme: digits 10000, CPU time: .028. Last 5 digits 75678. Chudnovsky's algorithm using binary splitting in Gambit Scheme: digits 100000, CPU time: .472. Last 5 digits 24646. Chudnovsky's algorithm using binary splitting in Gambit Scheme: digits 1000000, CPU time: 6.448. Last 5 digits 58151. Chudnovsky's algorithm using binary splitting in Gambit Scheme: digits 10000000, CPU time: 98.612. Last 5 digits 55897. So it appears that for this algorithm applied to large integers, GMP's bignum routines are about 3-4 times as fast as Gambit's bignum routines. Not so bad. For smaller bignums, GMP has a bigger advantage. The C program gmp-chudnovsky.c includes certain optimizations to this basic algorithm: http://gmplib.org/pi-with-gmp.html ftp://ftp.gmplib.org/pub/misc/gmp-chudnovsky.c On my machine, compiled with gcc -O3 -march=native -o gmp-chudnovsky gmp-chudnovsky.c -lgmp -lm the CPU times for 1,000,000 and 10,000,000 digits are 1.064 and 18.200 seconds, respectively. This is with a somewhat older machine model name : Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz running Ubuntu 13.04 with heine:~/programs/gambiteer/gambit> gcc -v Using built-in specs. COLLECT_GCC=gcc COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/4.7/lto-wrapper Target: x86_64-linux-gnu Configured with: ../src/configure -v --with-pkgversion='Ubuntu/Linaro 4.7.3-1ubuntu1' --with-bugurl=file:///usr/share/doc/gcc-4.7/README.Bugs --enable-languages=c,c++,go,fortran,objc,obj-c++ --prefix=/usr --program-suffix=-4.7 --enable-shared --enable-linker-build-id --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --with-gxx-include-dir=/usr/include/c++/4.7 --libdir=/usr/lib --enable-nls --with-sysroot=/ --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-gnu-unique-object --enable-plugin --with-system-zlib --enable-objc-gc --with-cloog --enable-cloog-backend=ppl --disable-cloog-version-check --disable-ppl-version-check --enable-multiarch --disable-werror --with-arch-32=i686 --with-abi=m64 --with-multilib-list=m32,m64,mx32 --with-tune=generic --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu Thread model: posix gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) heine:~/programs/gambiteer/gambit> gsi -v v4.6.9 20130607151908 x86_64-unknown-linux-gnu "./configure '--enable-single-host' '--enable-multiple-versions' '--enable-shared'" and the Ubuntu-provided GMP 5.0.5. (I'm sure the GMP folks have a better way to build GMP on my machine than the "generic" 64-bit version provided by Ubuntu.) Brad

7 18

Re: [gambit-list] JavaScript backend
by Marc Feeley 13 Fév '17

13 Fév '17

First of all, this change is for the universal backend. It is more of a temporary kludge to experiment with dynamically loading files generated by the universal backend. Here’s how it works… At the end of the link file, the Gambit linker generates a table of the Scheme modules required by the program. The table is passed as a parameter to the g_module_registry_init function of the Gambit runtime system. For example, the link command: gsc -link -l lib/_gambit.js a.js b.js will generate at the end of the link file “b_.js”: g_module_registry_init([new G_ModLinkInfo("_gambit",0), new G_ModLinkInfo("a",1), new G_ModLinkInfo("b",2)]); At then end of a file generated for the compilation of a module there is a call to a runtime system function that registers the module in the module registry. For example, when “a.scm” is compiled with the command “gsc -target js -c a.scm”, the file “a.js” generated ends with: g_module_register([g_make_interned_symbol("a"),g_bb1__20_a,1,null,false]); The parameter of g_module_register is a “module descriptor” giving information on the module: name, main function (g_bb1__20_a), preload flag (1), module meta information (null), and a dummy field (false) that is only interesting for the C backend. So when the files of generated code are loaded (incrementally) by the JS VM, g_module_register accumulates the modules in a table. When all the modules required by the program have beed loaded (in the example, _gambit, a and b) the function g_module_register will call the main function of the first module. This will run the Scheme code at the toplevel of the first module. The first module contains a loop, in Scheme, that iterates over the module registry and calls the main function of each of the remaining modules in the registry (this information is available in Scheme in the global variable ##program-descr). Specifically, the first module is the Gambit universal library (lib/_univlib.scm), which ends with a call to ##load-vm (a procedure defined in lib/_kernel.scm that runs each module other than the first). What my most recent change does is extend g_module_register so that any subsequent module that is loaded by the JS VM causes its immediate execution by calling the module's main function. In the C backend the mechanism is slightly different (and more flexible): the ##load-object-file procedure of the Gambit runtime library constructs a vector of module descriptors and this vector is passed to ##register-module-descrs-and-load! (defined in lib/_kernel.scm) which then runs the modules. It is more flexible because the loaded object file can contain more than one module, and also control goes through Scheme before the module is executed. Marc > On Jan 3, 2016, at 2:54 AM, Adam <adam.mlmb(a)gmail.com> wrote: > > Marc, > > Wait, what's the point? > > That is effectively C modules' default behavior isn't it? (even if it's the runtime or linker-generated code that actually does the actual run command.) > > So this way you create symmetrical behavior but the actual run command is in the module file itself rather than in runtime/linker - > > Is there any disadvantage.. could be, no, like, I need more modules loaded at the same time and with this model you introduced now, the global namespace in JS files is evaluated at load time so could cause a problem? > > > 2016-01-03 14:10 GMT+08:00 Marc Feeley <feeley(a)iro.umontreal.ca>: > I’ve just pushed a small change to the module registration method. Now, loading the generated .js file will run that file. > > Marc > > > On Jan 2, 2016, at 11:39 PM, Blake McBride <blake(a)mcbride.name> wrote: > > > > Yes, and I use jQuery get and html methods to load the html part. > > > > > > On Sat, Jan 2, 2016 at 8:43 PM, Marc Feeley <feeley(a)iro.umontreal.ca> wrote: > > That’s an interesting app! > > > > As I said, it shouldn’t be hard to do. In your app, how do you load new JS code? Are you using jQuery and the getScript method? > > > > Marc > > > > > On Jan 2, 2016, at 8:42 PM, Blake McBride <blake(a)mcbride.name> wrote: > > > > > > Hi Marc, > > > > > > Thanks for the reply. > > > > > > I started development of a Web based business application in 2006. The app is in production use. The front-end is about 450 screens written in Flash. The back-end is written in Java (over 9,000 classes) on top of an SQL database with 250 tables accessed through Hibernate. The front-end and back-end communicate through SOAP web services. > > > > > > Since Flash is now dead, I need to re-write at least parts of the front-end in JS to support tablets and phones at least. I have front-end JS code that communicates with the back-end SOAP Web services so I theoretically wouldn't need to touch the back-end. > > > > > > I have a preference to utilize scheme if I can, but the back-end is already written and works. It doesn't make sense to mess with it given the investment. > > > > > > The problems I had with Gambit (as well as many other systems) is as follows: > > > > > > Once a user logs in, my app has a consistent visual / UI framework. Beyond this framework, there are 450 different screens that appear within the framework (like in one of the div's). > > > > > > A. I cannot load all 450 screen at system startup. I must lazy load them as they are called up. > > > > > > B. The initial UI framework code should contain all of the Gambit machinery and libraries so that each of the 450 screens can be small, light-weight, compiled separately yet have full access to the entire Gambit facility. > > > > > > With respect, my investigation into Gambit as a possible solution in the past led me to the conclusions at that time it was not possible to produce separately compiled modules that leveraged off of a single main module for the Gambit machinery and libraries. > > > > > > I suppose some time has passed and I wanted to see if the situation has changed. I can only use Gambit if: > > > > > > 1. I can compile and load each screen separately > > > > > > 2. I only have to have one copy of the Gambit machinery and library so that the separate screens are small. > > > > > > Thank you. > > > > > > Blake > > > > > > > > > On Sat, Jan 2, 2016 at 7:06 PM, Marc Feeley <feeley(a)iro.umontreal.ca> wrote: > > > asmjs is cool and Gambit has already been compiled to it thanks to emscripten (see “Gambit in the browser”: http://feeley.github.io/gambit-in-the-browser/). The performance is not bad, perhaps 10x to 20x slower than when Gambit is compiled by gcc to native code. The main problem is the size of the JS that is generated when compiling Gambit-C with emscripten to JS. The gsi interpreter yields roughly 10 MB of asmjs code. > > > > > > As far as code size is concerned, a better solution is to use Gambit's JS backend with the Gambit library. The code generated is roughly half the size when minimized (and it could be even less if some thought went into how identifiers are encoded). > > > > > > Even more savings can be had by doing away with the default Gambit library and writing a custom library specialized for the application. Gambit’s library has lots of functionality that is not normally needed by typical applications. For example, the predefined map procedure can handle an arbitrary number of list parameters. If the application only uses the single list version, then this definition would be sufficient: > > > > > > (define (map f lst) > > > (if (pair? lst) > > > (cons (f (car lst)) (map f (cdr lst))) > > > ‘())) > > > > > > That 4 line version is 1/20th the size of the map defined in the Gambit library (which handles multiple lists, has type checking, precise error messages, same list length checking and is safe for multithreading). > > > > > > So perhaps what’s needed for Gambit to be more successful for web dev is the creation of such a “slim” library for Gambit to replace the default feature-full library. Gambit’s “tree shaker” would also help to eliminate the unused procedures of the slim library (unfortunately this only works for “whole program” compilation, so separate compilation would only be used for the development phase). > > > > > > Anyway, if this interests you please let me know. > > > > > > Marc > > > > > > > On Jan 1, 2016, at 11:44 AM, Blake McBride <blake(a)mcbride.name> wrote: > > > > > > > > Just some opinions. > > > > > > > > asmjs.org defines a portable subset that allows JS platforms to compile into very fast code. Targeting that subset, and within their spec, is probably a good idea. > > > > > > > > JS has, and is becoming increasingly, a very, very important platform. With ajax and rest services, code increasingly independent from the back-end is being developed. So, in a very important sense, JS has become its own platform, just like X86, and X86_64, along with Linux, Windows, Mac, etc. > > > > > > > > Many apps consist of two major parts: the back-end processing, and the front-end human interface. While one can write the back-end processing in any of dozens of languages targeting X86 or a VM, and the OS, there is really only one target for the other half - the human interface - and that is JS. > > > > > > > > While many languages are now targeting the JS platform (I am using the word "platform" to mean X86, X86_64, either, plus the OS) including, believe it or not, Smalltalk, there are few that can, IMO, be used in a real world application for several reasons. But, these issues will likely be resolved soon. > > > > > > > > With respect, Gambit, at least in the past, was in many ways another toy solution - one with a functioning "Hello world" application but missing important features that make it usable in a real-world situation. I would love to be a part of that solution, but alas, life doesn't offer me that level of freedom. I am only capable of using a system that is reportedly working, reporting bugs, making small adjustments, and providing feedback. Regardless of my attitude, preferences, and intentions, I cannot provide more. > > > > > > > > Look at node (JS for the back-end) and its vastly increasing popularity. Since developers are being forced to use JS on the front-end, it's bleeding over to the back-end. I think solutions that take JS seriously at this stage will prosper greatly. > > > > > > > > Now, having said all that, I would love to see Gambit target JS as a high-priority, first-class target. If that were the case, I would be happy to contribute what I stated above. > > > > > > > > Thanks! > > > > > > > > Blake McBride > > > > > > > > _______________________________________________ > > > > Gambit-list mailing list > > > > Gambit-list(a)iro.umontreal.ca > > > > https://webmail.iro.umontreal.ca/mailman/listinfo/gambit-list > > > > > > > > > > > > _______________________________________________ > Gambit-list mailing list > Gambit-list(a)iro.umontreal.ca > https://webmail.iro.umontreal.ca/mailman/listinfo/gambit-list >

2 1

Computing pi with parallel gambit
by Bradley Lucier 06 Fév '17

06 Fév '17

Marc: Because of accumulated roundoff error in IEEE floating-point arithmetic, Gambit's FFT-based bignum multiplication algorithm is limited to multiplying two numbers each of which has <= 2^{29} bits (on a 64-bit machine). Multiplying larger numbers falls back on Karatsuba multiplication, which cuts the size of the multiplicands roughly in half in each step, until you get back down to numbers of <= 2^{29} bits again, in which case FFT is used again. So, in fact, to compute a billion decimal digits of pi, we rely on Karatsuba to do the largest multiplications (and divisions and square roots, since they all reduce to multiplication). On a machine with enough memory, all the "sub-multiplications" in Karatsuba can be done in parallel. I haven't figured out how much memory is needed; it takes a few GB of temporary RAM to multiply the largest numbers with the FFT algorithm. I believe it took about 16GB total to calculate a billion decimal digits of pi using the current serial algorithm. Once parallel gambit is usable, computing pi to a billion (or even 10 billion, who knows) digits by parallelizing the larger Karatsuba multiplications might be a good test of the system. Brad

3 20

Building and using Gambit on windows
by Bill Six 02 Jan '17

02 Jan '17

I'm unable to figure out how to use Gambit on Windows successfully, and I'd like some help. (I'm plenty comfortable with Gambit on Linux/OSX). My general feeling is that I'm using configure's "prefix" argument incorrectly on Windows, which may be causing my problem. I can build gambit just fine using the msys2 environment with mingw64 as the compiler. (Here's the head of config.log "$ ./configure --prefix=/c/opt/gambit/bld --enable-single-host --enable-gcc-opts") I can do basic stuff in gsi, such as > (+ 1 2) 3 But the following doesn't work: > (include "~~/lib/_gambit#.scm") *** ERROR IN (console)(a)2.1 -- Can't open file "\\c\\opt\\gambit\\bld\\lib/_gambit#.scm" and I can't get "gsc -exe foo.scm" (for some trivial foo.scm) to not segfault. Any ideas? Thanks, Bill

3 5

Issues building Gambit with --enable-cplusplus
by Bob Coleman 28 Nov '16

28 Nov '16

Hello, I'm trying to create a simple Gambit wrapper for the opencv library. Opencv is written in C++ so I tried to build Gambit with the --enable-cplusplus flag. I was hoping this would be easier than trying to build a Gambit wrapper around a C wrapper around opencv, but I haven't been able to Gambit to build with the C++ option. I have no problems building Gambit with gcc, but g++ gives the errors below. Is there more to a C++ build that I may be missing? Is there an easier way to wrap a C++ library? I included my compiler versions below as well. Thanks for you help,Bob # configuring with just the --enable-cplusplus flag gives the errors below:# ./configure --enable-cplusplus bob@bob-Gazelle:~/GambitSchemeSourceRepo/gambit$ make -j8 from-scratch...libgambitgsc.a(_source.o): In function `___H_c_23__2a__2a_readtable_2d_string_2d_convert_2d_case_21_':_source.c:(.text+0xde0b): undefined reference to `___towupper'_source.c:(.text+0xdeca): undefined reference to `___towlower'libgambitgsc.a(_source.o): In function `___H_c_23__2a__2a_readtable_2d_convert_2d_case':_source.c:(.text+0xdfc9): undefined reference to `___towupper'_source.c:(.text+0xdfdd): undefined reference to `___towlower'libgambitgsc.a(_front.o): In function `___H_c_23_valid_2d_module_2d_name_3f_':_front.c:(.text+0x268c1): undefined reference to `___iswspace'libgambitgsc.a(_asm.o): In function `___H___asm_23_asm_2d_float_2d__3e_exact_2d_exponential_2d_format':_asm.c:(.text+0x24b24): undefined reference to `___isfinite'_asm.c:(.text+0x24b37): undefined reference to `___trunc'collect2: error: ld returned 1 exit statusmake[2]: *** [gsc] Error 1make[1]: *** [all-recursive] Error 1make: *** [from-scratch] Error 2 # configuring with my typical options plus --enable-cplusplus gives a different# set of errors#./configure --enable-single-host --enable-cplusplus --enable-c-opt --enable-gcc-opts --enable-openssl bob@bob-Gazelle:~/GambitSchemeSourceRepo/gambit$ make -j8 from-scratch...os_io.c: In function ‘long int ___release_rc_tls_context(void*)’:os_io.c:3705:23: error: invalid conversion from ‘void*’ to ‘___tls_context* {aka ___tls_context_t*}’ [-fpermissive] ___tls_context *c = x; ^os_io.c: In function ‘long int ___os_make_tls_context(long int, long int, long int, long int, long int, long int, long int)’:os_io.c:3911:20: error: invalid conversion from ‘void*’ to ‘void**’ [-fpermissive] 0) ^In file included from os_io.c:12:0:../include/gambit.h:10260:23: note: initializing argument 2 of ‘long int ___SCMOBJ_to_STRING(long int, void**, int, int, int)’ ___IMP_FUNC(___SCMOBJ,___SCMOBJ_to_STRING) ^../include/gambit.h:1554:43: note: in definition of macro ‘___IMP_FUNC’ #define ___IMP_FUNC(type,name)extern type name ^os_io.c:3919:20: error: invalid conversion from ‘void*’ to ‘void**’ [-fpermissive] 0) ^In file included from os_io.c:12:0:../include/gambit.h:10260:23: note: initializing argument 2 of ‘long int ___SCMOBJ_to_STRING(long int, void**, int, int, int)’ ___IMP_FUNC(___SCMOBJ,___SCMOBJ_to_STRING) ^../include/gambit.h:1554:43: note: in definition of macro ‘___IMP_FUNC’ #define ___IMP_FUNC(type,name)extern type name ^os_io.c:3927:20: error: invalid conversion from ‘void*’ to ‘void**’ [-fpermissive] 0) ^In file included from os_io.c:12:0:../include/gambit.h:10260:23: note: initializing argument 2 of ‘long int ___SCMOBJ_to_STRING(long int, void**, int, int, int)’ ___IMP_FUNC(___SCMOBJ,___SCMOBJ_to_STRING) ^../include/gambit.h:1554:43: note: in definition of macro ‘___IMP_FUNC’ #define ___IMP_FUNC(type,name)extern type name ^In file included from os_io.c:12:0:../include/gambit.h:10260:23: note: initializing argument 2 of ‘long int ___SCMOBJ_to_STRING(long int, void**, int, int, int)’ ___IMP_FUNC(___SCMOBJ,___SCMOBJ_to_STRING) ^../include/gambit.h:1554:43: note: in definition of macro ‘___IMP_FUNC’ #define ___IMP_FUNC(type,name)extern type name ^os_io.c:3941:20: error: invalid conversion from ‘void*’ to ‘void**’ [-fpermissive] 0) ^In file included from os_io.c:12:0:../include/gambit.h:10260:23: note: initializing argument 2 of ‘long int ___SCMOBJ_to_STRING(long int, void**, int, int, int)’ ___IMP_FUNC(___SCMOBJ,___SCMOBJ_to_STRING) ^../include/gambit.h:1554:43: note: in definition of macro ‘___IMP_FUNC’ #define ___IMP_FUNC(type,name)extern type name ^make[2]: *** [os_io.o] Error 1make[2]: *** Waiting for unfinished jobs....make[1]: *** [all-recursive] Error 1make: *** [from-scratch] Error 2 ## compiler versions, in case that's helpful # gcc -vUsing built-in specs.COLLECT_GCC=gccCOLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/5/lto-wrapperTarget: x86_64-linux-gnuConfigured with: ../src/configure -v --with-pkgversion='Ubuntu 5.4.0-6ubuntu1~16.04.4' --with-bugurl=file:///usr/share/doc/gcc-5/README.Bugs --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --prefix=/usr --program-suffix=-5 --enable-shared --enable-linker-build-id --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --libdir=/usr/lib --enable-nls --with-sysroot=/ --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --with-default-libstdcxx-abi=new --enable-gnu-unique-object --disable-vtable-verify --enable-libmpx --enable-plugin --with-system-zlib --disable-browser-plugin --enable-java-awt=gtk --enable-gtk-cairo --with-java-home=/usr/lib/jvm/java-1.5.0-gcj-5-amd64/jre --enable-java-home --with-jvm-root-dir=/usr/lib/jvm/java-1.5.0-gcj-5-amd64 --with-jvm-jar-dir=/usr/lib/jvm-exports/java-1.5.0-gcj-5-amd64 --with-arch-directory=amd64 --with-ecj-jar=/usr/share/java/eclipse-ecj.jar --enable-objc-gc --enable-multiarch --disable-werror --with-arch-32=i686 --with-abi=m64 --with-multilib-list=m32,m64,mx32 --enable-multilib --with-tune=generic --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnuThread model: posixgcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) # g++ -vUsing built-in specs.COLLECT_GCC=g++COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/5/lto-wrapperTarget: x86_64-linux-gnuConfigured with: ../src/configure -v --with-pkgversion='Ubuntu 5.4.0-6ubuntu1~16.04.4' --with-bugurl=file:///usr/share/doc/gcc-5/README.Bugs --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --prefix=/usr --program-suffix=-5 --enable-shared --enable-linker-build-id --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --libdir=/usr/lib --enable-nls --with-sysroot=/ --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --with-default-libstdcxx-abi=new --enable-gnu-unique-object --disable-vtable-verify --enable-libmpx --enable-plugin --with-system-zlib --disable-browser-plugin --enable-java-awt=gtk --enable-gtk-cairo --with-java-home=/usr/lib/jvm/java-1.5.0-gcj-5-amd64/jre --enable-java-home --with-jvm-root-dir=/usr/lib/jvm/java-1.5.0-gcj-5-amd64 --with-jvm-jar-dir=/usr/lib/jvm-exports/java-1.5.0-gcj-5-amd64 --with-arch-directory=amd64 --with-ecj-jar=/usr/share/java/eclipse-ecj.jar --enable-objc-gc --enable-multiarch --disable-werror --with-arch-32=i686 --with-abi=m64 --with-multilib-list=m32,m64,mx32 --enable-multilib --with-tune=generic --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnuThread model: posixgcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4)

2 2

Thanks for Gambit, Marc!
by Adam 27 Nov '16

27 Nov '16

Thanks for Gambit, Marc! And happy thanksgiving (45 days belated)! Adam

2 1

[ANN] Gambit v4.8.6 released
by gambit＠iro.umontreal.ca 19 Nov '16

19 Nov '16

4 5

How use the new Gambit debug options?
by Adam 15 Nov '16

15 Nov '16

Hi Marc, https://github.com/gambit/gambit/commit/1ac08aa15c00e69da17e0d0f28249592f79… , yey! Does "--enable-debug" imply any other options, what does it do? Which debug options would suit a program where you want to be able to understand the reasons for a crash using GDB and any other tool, but other than that want normal or high performance? Thanks!

1 0

Re: [gambit-list] parallel GC
by Bradley Lucier 10 Nov '16

10 Nov '16

I forgot to say that this is on a machine where nproc returns 8, but there's really only 4 cores and it's hyperthreaded: model name : Intel(R) Xeon(R) CPU E3-1271 v3 @ 3.60GHz Brad On 10/28/2016 05:54 PM, Bradley Lucier wrote: > On 10/25/2016 02:41 PM, Marc Feeley wrote: >> Gambit has reached a milestone today with the implementation of the >> parallel garbage collector. This is an important step towards truly >> concurrent Gambit threads. >> >> When Gambit is configured with --enable-multiple-threaded-vms the >> available processors will cooperate to do the garbage collection in >> parallel. > > When I configure with > > ./configure 'CC=gcc -march=native' '--enable-single-host' > '--enable-multiple-versions' '--enable-shared' > --enable-multiple-threaded-vms > > It takes this long to run the unit tests: > > LD_LIBRARY_PATH=../lib:../gsi:../gsc:/usr/local/libimobiledevice/lib:/usr/local/Gambit/current/lib:/usr/local/netpbm10/lib: > ../gsi/gsi -:tl,~~bin=../bin,~~lib=../lib,~~include=../include -f > ./run-unit-tests.scm > [ 122| 0| 0] 100% ########################################## 3.7s > PASSED ALL 122 UNIT TESTS > > When I configure with > > heine:~/programs/gambit/gambit> ./configure 'CC=gcc -march=native' > '--enable-single-host' '--enable-multiple-versions' '--enable-shared' > > the unit tests run in this time: > > LD_LIBRARY_PATH=../lib:../gsi:../gsc:/usr/local/libimobiledevice/lib:/usr/local/Gambit/current/lib:/usr/local/netpbm10/lib: > ../gsi/gsi -:tl,~~bin=../bin,~~lib=../lib,~~include=../include -f > ./run-unit-tests.scm > [ 122| 0| 0] 100% ########################################## 1.6s > PASSED ALL 122 UNIT TESTS > > That's a big difference. This is on Ubuntu 16.10 with the built-in gcc > 6.2.0. > > Any suggestions? > > Brard

4 15

Meroon package not downloadable from Dumping Grounds.
by Bradley Lucier 10 Nov '16

10 Nov '16

Marc: When I try to download the package MeroonV3-2012Jan20.tar.bz2 from http://gambitscheme.org/wiki/index.php/Dumping_Grounds I'm taken to a page http://gambitscheme.org/wiki/images/c/c9/MeroonV3-2012Jan20.tar.bz2 that says %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% Not Found The requested URL /wiki/images/c/c9/MeroonV3-2012Jan20.tar.bz2 was not found on this server. %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% I wasn't able to upload a new version of Meroon a few weeks ago, either, so something's broken. Brad

1 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Gambit-list Novembre 2016